Winging It

Not much to report today, but my inner wing turned up! Whoop! First dry fit wasn't too bad at all. I don't think this side of the car has been fiddled with as much as the other side!



This time around I learnt from my mistakes on the off-side and scribed around the flanges when the panel was clamped up. Now I should be able to mark out and drill my plug weld holes in this panel, and avoid grinding impossible welds inside the dash again. :) I welded up the holes for the door hinges as they were way off. Also stripped the e-coat in the areas enclosed by the door post and bulkhead ready for a coat of POR15.



Hopefully tomorrow I can get a bit of paint on this and get ready for welding it in!